The ARIKSO UPS uses online double-conversion technology, which completely eliminates all types of power grid issues and provides customers with a stable and pure sine-wave power supply.
The ARIKSO UPS uses online double-conversion technology, which completely eliminates all types of power grid issues and provides customers with a stable and pure sine-wave power supply.
The innovative design ensures these products offer unmatched reliability and high performance. A high input power factor and low input current harmonics guarantee the UPS’s environmental friendliness and safety, while high efficiency ensures energy savings.
Technical Specifications - LT3310-40S datasheet_En
| Parameter | LT3310S | LT3315S | LT3320S | LT3330S | LT3340S |
| Power (at cos φ = 1.0) | 10 kVA | 15 kVA | 20 kVA | 30 kVA | 40 kVA |
| Input | |||||
| Phase | 3 phases, 4 wires + ground | ← | ← | ← | ← |
| Nominal voltage | 380 / 400 / 415 V AC | ← | ← | ← | ← |
| Voltage range | 138 ~ 485 V AC | ← | ← | ← | ← |
| Frequency range | 40 ~ 70 Hz | ← | ← | ← | ← |
| Power factor (input) | >= 0.99 | ← | ← | ← | ← |
| Harmonic distortion (THDi) | <= 3% (100% non-linear load) | ← | ← | ← | ← |
| Output | |||||
| Output voltage | 380 / 400 / 415 V AC | ← | ← | ← | ← |
| Power factor (output) | 1.0 | ← | ← | ← | ← |
| Voltage regulation | ± 1% | ← | ← | ← | ← |
| Output frequency | 50 / 60 Hz | ← | ← | ← | ← |
| Waveform | Pure sine wave | ← | ← | ← | ← |
| Overload capacity | 110% — 60 min; 125% — 10 min; 150% — 1 min | ← | ← | ← | ← |
| Efficiency | up to 95% | ← | ← | ← | ← |
| Crest factor | 3:1 | ← | ← | ← | ← |
| Battery | |||||
| Configuration | With external batteries | ← | ← | ← | ← |
| Battery voltage | Optional, standard range 240V, built-in 30-40 pcs. 7/9Ah batteries | ← | ← | Optional, standard range 240V, built-in 80 pcs. 7/9Ah batteries | ← |
| Battery management | Intelligent system for extending battery service life | ← | ← | ← | ← |
| Battery charge current | Max. 10 A | ← | ← | ← | ← |
| Interfaces | |||||
| Ports | USB, RS232, RS485, Parallel port, REPO port, LBS port (optional), Backfeed port, Intelligent slot, SNMP | ← | ← | ← | ← |
| Parallel operation board | Built into UPS | ← | ← | ← | ← |
| Operating Conditions | |||||
| Operating temperature | 0 ~ 40°C | ← | ← | ← | ← |
| Storage temperature | -25 ~ 55°C (without battery) | ← | ← | ← | ← |
| Relative humidity | 0 ~ 95% (non-condensing) | ← | ← | ← | ← |
| Installation height | < 1500 m | ← | ← | ← | ← |
| Noise level | < 55 dB | ← | ← | ← | ← |
| Protection | Short circuit, overload, overheating, low battery charge, others | ← | ← | ← | ← |
| Physical Parameters | |||||
| Dimensions (WDH), mm | 790*280*720 | 950*400*985 | 950*400*985 | 950*400*985 | 950*400*985 |
| Dry weight, kg (without batteries) | 53.5 | 54 | 54.5 | 55.5 | 60.5 |
*Note: The ← arrow indicates that the parameter value is exactly the same as the value in the column to the left.
