The three-phase modular UPS features a frame-based design and is suitable for a standard 19-inch rack cabinet.
The three-phase modular UPS features a frame-based design and is suitable for a standard 19-inch rack cabinet.
Three-level architecture and DSP digital control ensure stable, pure sine-wave power output over a wide input voltage range.
The system supports N+X redundancy, a power factor of 1, flexible battery configuration, multiple communication interfaces, and intelligent battery management to enhance reliability and extend battery life.
Technical Specifications - ARIET ABELLION M3360H_15 datasheet_En
| MODEL | M60 |
| Capacity | |
| Frame | 60 kVA |
| Module | 15 kVA |
| Number of modules | 4 |
| Input | |
| Phase | 3 phases, 4 wires and ground |
| Nominal voltage | 380/400/415 VAC |
| Voltage range | 138–485 VAC |
| Operation at 40°C | UPS operates at full load at 323–485 VAC and operates with derated capacity at 323–138 VAC |
| Operation at 30°C | UPS operates at full load at 305–485 VAC and operates with derated capacity at 305–138 VAC |
| Frequency range | 40/70 Hz |
| Input power factor | ≥0.99 |
| Total harmonic distortion of current (THDi) | ≤3% (full linear load), ≤ 5% (at 100% non-linear load) |
| Bypass voltage range | Max. voltage: 220V: +25% (optional +10%, +15%, +20%); 230V: +20% (optional +10%, +15%); 240V: +15% (optional +10%). Min. voltage: -45% (optional -20%, -30%) |
| Frequency protection range | ±10% |
| Generator connection | Yes |
| Battery | |
| Voltage | ±180V / 192V / ±204V / ±216V / ±228V / ±240V / ±252V / ±264V / ±276V / ±288V / ±300V VDC (30/32/34/36/38/40/42/44/46/48/50 pcs., optional) |
| Charging current (UPS Cabinet) | 40 A max. |
| Charging current (UPS Module) | 5 A max. |
| Output | |
| Phase | 3 phases, 4 wires and ground |
| Nominal voltage | 380/400/415 VAC |
| Power factor | 1 |
| Voltage regulation | 1% |
| Crest factor | 3:1 |
| Total harmonic distortion (THD) | ≤ 2% with linear load, ≤ 4% with non-linear load |
| Efficiency | 96% |
| Overload | ≤ 110%, transfer to bypass after 60 min; ≤ 125%, transfer to bypass after 10 min; ≤ 150%, transfer to bypass after 1 min |
| Frequency in line mode | ±1% / ±2% / ±4% / ±5% / ±10% of nominal frequency (optional) |
| Frequency in battery mode | 50/60 Hz ± 0.1% |
| Transfer time | Line → Battery: 0 ms; Line → Bypass: 0 ms |
| Protection | |
| Alarm | overload, mains failure, UPS fault, low battery, etc. |
| Protection | short circuit, overload, overtemperature, low battery, fan fault |
| Communication Interfaces | RS485, dry contact, SNMP card (optional) |
| Operating Conditions | |
| Operating temperature | 0~40°C (operation) |
| Storage temperature | -25°C ~ 55°C (without battery) |
| Humidity | 0–95% (non-condensing) |
| Installation altitude | < 1500 m |
| Noise | <70 dB |
| Physical Parameters | |
| Dimensions (DWH) mm (Frame) | 850×485×827 |
| Dimensions (DWH) mm (Module) | 620×440×86 |
| Weight (kg) (Frame) | 75 kg |
| Weight (kg) (Module) | 19.5 kg |
| Standards | EN62040–1, EN62040–2, EN62040–3 |
